Men's Canyoning Wetsuit Trousers 5 mm - MK 500
Store Availability
Store availability
BENEFITS
Anatomic design
Legs and sides made of 4 mm neoprene and 3 mm Supratex.
Easy dressing
Trousers with braces.
Ease of use
Clean opening, fly zip.
Freedom of movement
Men's fitted cut for ideal freedom of movement. XS to XL.
Abrasion resistance
Knee and seat reinforcements for superior robustness.
Modularity
You can mix and match sizes for the long johns and jacket.
Warmth
With 5 mm neoprene on the chest, these trousers provide thermal comfort
TECHNICAL INFORMATIONS
Robustness
Knee reinforcements for superior robustness.
Outer reinforcement patches positioned over sensitive areas. To reinforce the joints, they are braided at sensitive points.
Melcro-taped: inner reinforcement of seams in delicate areas
Taped seams with a GBS glued and blind-stitched assembly.
The seams of the suit and hood are waterproof, with a glued and blind-stitched (GBS) assembly: the neoprene is glued first, then stitched for maximum strength (the needle does not completely pass through the neoprene to prevent water infiltration).
Multi-thickness
The wetsuit features 5 mm neoprene on the chest.
4 mm on the upper leg, with 3 mm and 2.5 mm Supratex through the rest of the leg.
This multi-thickness construction provides the necessary comfort and ergonomics for canyoning
Limitation of water ingress
The ends of the ankles have silicone stoppers that limit water ingress.
They also provide better support when using socks
Thermal insulation details.
LongJohn-style wetsuit with 5 mm neoprene on the chest.
4 mm on the upper part of the legs.
Once the film of water is trapped between your body and the jacket, no more water is able to circulate and so the water is not replenished.
The interior of each leg features a skirt (inner stop water) to prevent water being exchanged and warm water being transferred away from the body.
Tips for looking after your canyoning suit?
1/ After each session, soak the wetsuit in clean water, on the outside and the inside
2/ Use a bactericide solution to sanitise
3/ Rinse thoroughly in clean water
4/ Dry on a wide hanger in a well-ventilated place away from direct light. Keep away from direct sunlight as it can fade the fabric parts of the suit.
Choose your size carefully
To make the most of the features of your wetsuit, it is necessary to choose the correct size. A canyoning wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you choose a wetsuit that is too big, folds will appear, you will experience irritation and thermal insulation will be reduced (letting in water).
COMPOSITION
composition
Foam: 100.0% Rubber; Lining: 100.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry your wetsuit out of the sun and away from any heat sources. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
Restrictions on use
Must be worn with a neoprene jacket. Water < 12°C.
TESTS AND WARRANTY
Warranty
2 Years