Men’s WINDWARM MT900
Store Availability
Store availability
BENEFITS
Water repellent
Water-repellent treatment prevents water seeping into the fabric when it rains
Abrasion resistance
Use of 2 layer fabric on the shoulders to reinforce this area
Warmth
Comfortable from 13°C to 10°C worn as a second layer. Micro-grid fleece lining
Weight
This jacket weighs about 490 g in size L
Windproof
The multi-layer structure protects from winds up to 30 km/h
Breathability
Back lining in ventilated fabric to let out vapour produced by the body
TECHNICAL INFORMATIONS
Sizing information
quite a close-fitting cut. The jacket's inner volume allows you to wear it over a warm second layer such as a micro-fleece.
Thermal comfort and windproof
The wind makes you feel considerably colder. With an outside temperature of 0°C and 20 km/h winds, it will feel like the temperature is -10°C. "Windproof" components fight the uncomfortable effects associated with this "freezing effect. They are very effective at reducing heat loss by creating a barrier against the wind.
Protective details
- Drawstring tightening with toggles at the bottom of the jacket
- Tightening at the cuffs with Velcro tabs
- Adjustable hood
Water-repellent property of component (not to be confused with waterproofing)
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it.This prevents the fabric from soaking up water and keeps it lightweight and breathable.The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.You will find out how to reactivate the water repellency of your softshell in our article "Maintaining, washing and repairing waterproof or water-repellent clothing" on the Forclaz website
Recommended additional product
To reactivate the water repellency, you can use the textile waterproofing liquid available in stores or on the website under reference 8554908,
It regenerates the water repellency of the fabric and optimises the performance of your garment throughout its life.
COMPOSITION
composition
Lining: 100.0% Polyester; Outer fabric: 100.0% Polyamide; Secondary lining: 11.0% Polyamide, 89.0% Wool; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Restrictions on use
Not waterproof: not for use in rain.
TESTS AND WARRANTY
Test product
In November 2018, 8 trekkers (4 men and 4 women) and part of the Forclaz design team tested this jacket for 4 days in the southern French Alps (Lus La Croix Haute). You can expect wind, rain, a bit of snow, a bivouac... and a lot of fun! We were then able to make the final modifications and validate it for use for mountain trekking.
Warranty
2 Years