Climbing Rope 9.5 mm x 80 m - Cliff Green
Store Availability
Store availability
BENEFITS
Stretch
Good shock absorption and robustness over time.
Lightweight
Excellent compromise between lightness and robustness 58 g/m
Ergonomic grip
Perfect balance between good grip for belaying and a low weight.
Robustness
Longlife treatment, for a protected and more abrasion-resistant sheath.
Instructions
DownloadTECHNICAL INFORMATIONS
LONGLIFE TREATMENT
Special treatment that increases the rope's lifespan and prevents water and dirt seepage.
Greater resistance to wear.
PLASMA TREATMENT
Special treatment helps to improve rope's smoothness.
Middle Mark
To improve your safety, this rope features a black mark which indicates the middle of the rope.
TECHNICAL FEATURES
Number of falls: 6
IMPACT FORCE: 9.3 KN
DYNAMIC ELONGATION: 30.8%
STATIC ELONGATION: 5.6%
SHEATH SLIPPAGE: 0
WEIGHT
58 g/m
PLEASE NOTE: Weight measurements made according to the EN 892 standard.
For example, for a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions.
This gives you the real weight of the rope, which is often superior to the weight given by the standard.
The weight measurement according to the standard is used to compare two ropes to each other.
MADE IN FRANCE
All of our ropes are designed and tested in Chamonix, in the Mont Blanc valley.
They are made in northern France by our manufacturing partner, Cousin, expert rope makers for 170 years.
WASHING YOUR ROPE
It's important to properly care for your rope to reduce wear.
As dirt wears ropes down, we recommend:
1- using a rope cover;
2- If the rope is dirty, wash it with clean, lukewarm water.
Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water.
3- Air dry the rope out of the sun and away from all sources of heat.
STORING YOUR ROPE
Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
CHECKING YOUR ROPE
It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
ROPE LENGTH EVOLUTION
As they get older, all climbing ropes get shorter. Usually, they get 2 to 5% shorter, but this can reach up to 10% depending on humidity, heat, falls, washing, etc. To decrease this effect, we calculate an extra margin of length when manufacturing our ropes, but sometimes this isn't enough. This is why we recommend regularly measuring your rope and checking the rope’s middle mark.
CERTIFICATION
Rope certified in line with the standard EN 892:+A1 standard: 2016
COMPOSITION
composition
Main fabric: 100.0% Polyamide
Tips for storage and maintenance
Storage tips
Use a rope bag, to reduce rope wear and coiling<br /> <br /> Do not store in the boot of the car in high temperatures<br /> <br /> Avoid all contact with chemical products<br /> <br /> Dry before storing (away from UV rays)
TESTS AND WARRANTY
Test product
Designed by our teams in the Chamonix valley (France), at the foot of the Mont Blanc, all our ropes are lab tested, certified to guarantee their mechanical features. Our technical partners test them in the field to validate product claims.
Warranty
2 Years
Agree by
Team SIMOND climbers, climbing instructors
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 100% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.