Women’s waterproof mountain walking jacket MH100
Store Availability
Store availability
BENEFITS
Anatomic design
Removable & adjustable hood Adjustable cuffs.Tightening cord at bottom of jacket
Lightweight
Just 550 g in size M
Waterproof
100% taped seams. 2-layer coating withstands a 5000 mm water column
Pockets
2 zipped hand pockets and 1 zipped inside pocket to keep your items safe.
Breathability
20-cm side openings and perspiration-wicking component (RET = 12)
TECHNICAL INFORMATIONS
Cut
This jacket has a cut that fits all shapes while still looking very feminine. A warm layer, such as a fleece or light jumper, can be worn underneath. Inner lining can also provide more comfort.
You can choose your usual size, or a size above if you don't want it to be worn fitted.
Removable hood
The hood can be removed thanks to the press studs. Its height can be adjusted using an elasticated cord, and its depth adjusted using a Velcro tab located at the back of the hood.
CONSTRUCTION OF THE JACKET
This jacket is constructed with 2 coated layers, including a mesh lining (large mesh lining)
‘2 layers’ means there is the outer fabric and the lining.
A coating is applied to the inside of the fabric, it is similar to a resin that makes the component waterproof, while remaining breathable. The inner lining of the jacket has the role of protecting this coating
Waterproofness test
Waterproofing is measured by a fabric’s resistance to water pressure expressed in mm of water column (JIS 1092 standard). The higher the water pressure, the more waterproof the fabric.
The component of this product has a waterproof rating of 5000 mm, i.e. it can withstand the pressure exerted by a 5000 mm column of water. This is also equivalent to 5 000 Schmerbers.
Breathability test
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little breathability
Our product has a 12 RET rating
How do I restore my jacket's water-repellent properties?
The water-repellent property of a fabric is its capacity to make water run off its surface without absorbing it. This prevents the fabric from soaking up water and keeps it lightweight and breathable. The fabric is made water-repellent by treating its outer surface, however this property may deteriorate with use.
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute-Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
COMPOSITION
composition
Main fabric: 100.0% Polyester; Main lining: 100.0% Polyester; Secondary lining: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Always make sure that this waterproof protective garment is completely dry before storing it.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Morphology (especially thanks to the 3D analysis) Movement sciences Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences + we describe the specific aspects of the test related to the product (e.g. shower, wind tunnel, etc.)
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessDope dyed
Product made from 79% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialRecycled polyester
Product made from 9% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessBiton
Product made from 9% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.