City Bike Tyre City5 Protect 650X35A / ETRTO 35 - 590 / 590 mm Rims

IMPORTANT COMPATIBILITY INFORMATION

Two references for city tyres are available in size 650:

650A, for rims with a 590mm diameter,

650B, for rims with a 584mm diameter

Be sure to check this information.

These tyres are designed to be installed only on traditional 26" rims for mountain bikes, 559mm diameter.

How to measure tyre wear

To measure the wear on your city bike tyres and to know when they need replacing, you need to inspect the tread.

Usual signs of wear include:

- tread starting to fray

- the appearance of a series of micro cracks

- low tread depth

- the carcass becomes visible.

In all these cases the tyre is worn and needs replacing.

How to remove a tyre

To remove your tyre, deflate the inner tube until no more air comes out.

Once deflated, use a tyre lever to remove the tyre from the rim.

How to fit a tyre

To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 30% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube).

Then, insert the other side of the tyre into the rim, starting on the side opposite the valve.

Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.

How to inflate your tyre correctly

Inflate your tyre carefully. The recommended pressure is shown on the side of your tyre.Also, before each outing, make sure that your tyres are at the correct pressure for your ride.

Tip from the pros

When inflating your tyre, make sure you inflate it to the suitable pressure for the terrain you will be riding on and, above all, the weather conditions you will be riding in.

When riding in rainy weather, lower the tyre pressure to increase the tyre's traction.

On the other hand, when riding in dry weather, you can increase the pressure for better performance.