Adult/kids’ ski and snowboard helmet H-FS 300 Light Yellow
Store Availability
Store availability
BENEFITS
Lightweight
ABS construction type 520g in size M.
Warmth
Inner hat with large mesh surface for good thermal regulation
Stability
Head size adjustment wheel. Bowl design for more stability.
Shock protection
Complies with EN1077:2007 standard (class B). ABS shell.
Ventilation
12 holes to aerate and evacuate humidity.
TECHNICAL INFORMATIONS
A rigorous standard for protections
The standard EN 1077:2007 category B is a European standard that applies to helmets used for cranial protection during downhill skiing or snowboarding. This Standard tests the ability to absorb shocks and resistance to penetration.
A practical adjustment wheel to adapt the helmet to fit you.
The Turnring is essential to the support of your helmet. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also gives you comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.
Passive ventilation system
The Venting System improves the thermal regulation of your helmet and reduces the appearance of fog in your goggles. This type of design funnels the air to remove heat and humidity from the entire helmet/goggles area.
Hard Shell construction
The Hard Shell Construction gives more durability and robustness to your helmet. This type of structure incorporates an outer shell, made of ABS, injection moulded to withstand powerful impacts. High resistance to bumps and knocks. The internal EPOS skullcap absorbs impact and collision at the time of impact. We recommend changing your snowboard helmet at least every 5 years if it hasn’t suffered a significant shock in the meantime.
SAFETY
Avoid putting a thick hat under your child's helmet as this will move the helmet away from their head and they won't be as well protected.
Opt instead for a very thin beanie or balaclava that does not affect their safety. A helmet has good insulating properties. There is often no point in adding anything else. Also, avoid adding a camera to the helmet as this can affect safety. The standard does not take into account any elements added to the helmet.
Return terms and conditions (Specific product: personal protection equipment)
Make sure this product is right for you.
Otherwise, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging.
SIZING
The size of the FS 300 helmet is slightly different from other Wedze helmets. It’s a bit shorter at the forehead. Check when trying them on.
COMPOSITION
composition
Foam: 100.0% Polystyrene; Shell: 100.0% Acrylonitrile Butadiene Styrene; Lining: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Dry thoroughly before storing
Restrictions on use
Replace any helmet that has sustained an impact.
TESTS AND WARRANTY
Test product
All Wedze products are tested under the actual conditions of use for which they were designed: in the snow, cold and in all the conditions encountered when snowboarding (and skiing). Our design teams, product managers, engineers and pattern makers make sure that the programme for which the product is designed perfectly matches its use in the field.
Warranty
2 Years