Kids’ Freestyle All Mountain Snowboard- Endzone JR 105 cm

A word from the product manager

During snowboard lessons, very quickly (sometimes even at the end of the first week of classes), instructors teach kids to slide back to be immediately at home in both directions. Based on this observation, we have designed this board with a Twin Tip shape (symmetrical at the front and back). These kids’ freestyle snowboards are also the most versatile because they ride as well on piste as at the edges of the piste.

what size of kids’ snowboard?

Kids grow up which makes it a difficult choice. The right size quickly becomes too small but you can't go for one that's too big otherwise it will be difficult to learn and may put them off.

Let’s say -10 cm compared to their size is the maximum snowboard size, and -25 cm is the minimum. This 105 cm board can therefore be suitable for kids from 1.15 m (-10 cm) to 1.30 m (-25 cm).

The board grows with your kid

Kids grow around 6 cm per year. Ideally they can keep their board at least 2 years, then hand it down to their younger sister or brother.

That's why we offer 2 position options for bindings:

- year 1, on the 4 inserts closest to the centre of the board

- in year 2, on the 4 inserts furthest from the centre of the board.

But you can also sell the snowboard second hand :-)

Technical information

Front Width 245 mm / Centre 216 mm / Rear 245 mm

Radius 5.0 m

Effective edge 742 mm

Number of inserts: 2 x 6 (2 possible positions per binding / 40 mm between each position)

Recommended stance: 350 mm

When should you wax your snowboard?

Decathlon snowboards are supplied already waxed. They then require regular maintenance like all snowboards and skis: ideally, waxing every 5 outings and at least once a year, - either at the beginning of the season to start with a very good glide, - or at the end of the season so that the wax protects the base all summer long.

Glide quality: extruded base

The bases are made from polyethylene using 2 different technical processes:

- extruded base, with a certain density of polyethylene

- sintered base, with a greater density of polyethylene (fewer holes, more PE)

An extruded base provides a normal glide and good resistance over time.

A sintered base is the Rolls Royce of bases. The glide is really fantastic.

Board weight

1,410 g +/- 6%