SOFT CAMPING ICE CHEST - 10L
Store Availability
Store availability
BENEFITS
Compact design
Simple folding system in order to save space
Ease of use
Large zipped opening | Elastic inside to hold a water bottle
Isothermal
Preserves food for 4 hours without ice blocks | Standard: EN 12546-2
Weight
Lightweight: 220g
Carrying comfort
Adjustable shoulder strap
TECHNICAL INFORMATIONS
Capacity
10 litres. Recommended for 1 to 2 people maximum.
Dimensions
When unfolded, the cooler's dimensions are:
Height: 32 cm | Length: 21 cm | Width: 21 cm
Internal dimensions:
Height: 29 cm | Length: 18 cm | Width: 19 cm
When folded, the coller becomes more compact: Length: 30 cm | Width: 21 cm | Height: 10 cm
WATERPROOFING
This ice box is not waterproof.
Directions for use
Using tests, conducted according to the EN 12546-2 standard, have allowed us to measure that our cooler keeps food for 6 hours with ice packs (600 g).
To improve the thermal properties of your cooler, we recommend:
- using cold packs,
- leaving your cooler in the shade,
- only opening it when necessary and quickly closing it.
COMPOSITION
composition
Foam: 100.0% Polyethylene; Inner fabric: 100.0% Polyester; Main fabric: 100.0% Polyester
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We recommend you choose a clean, dry area. It’s best to wash and dry your cooler before storing it away.
Restrictions on use
Not waterproof. <br /> Do not load your ice box above 4 kg.
TESTS AND WARRANTY
Test product
The European standard EN 12546-2 certifies the performance of the cool bag without ice packs. To obtain this standard, tests are carried out by an external laboratory. These tests consist of placing water at a temperature of 5°C into the cooler, which itself is placed in an environment of 32°C. The point is to then measure the time the water takes to reach a temperature of 15°C. The time measured for this cooler is 5 hours.
Warranty
2 Years
Agree by
To fulfil your needs, the Quechua products are tested in the countryside under the conditions that you will come across when camping. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
ProcessGreige
12% of the fabric is not dyed
The greige means that the fabric is not dyed. The colour is in its natural state. Dyeing being one of the steps that has the biggest environmental impact.
-
ProcessDope dyed
8% of the fabric color is made by dyeing the yarn at the source
Dyeing textiles requires lots of water but also leads to lots of water waste generated in dyeing vats. To reduce this environmental impact, we choose solution dyeing, which integrates colour pigments when manufacturing the thread.
-
ProcessBiton
22% of the fabric color is made by dyeing only one yarn out of two
Dyeing textiles requires the use of lots of water, whilst also generating water waste from dyeing vats. To reduce this environmental impact, we use just one dyed mass-coloured thread out of two out, subsequently reducing our consumption of water and our impact on it.