Kids' Swimming Goggles Clear Lenses SPIRIT Green Pink
Store Availability
Store availability
BENEFITS
Anti-fogging
Enjoy swimming with clear vision, thanks to the anti-fog treatment.
Field of vision
Enjoy one of the best fields of vision in our range of goggles.
Stability
Benefit from an excellent fit with these goggles with side adjustments.
Sun protection
Lenses filter more than 99% of harmful UVA and UVB rays to protect your eyes.
TECHNICAL INFORMATIONS
REDUCE FOG IN YOUR SWIMMING GOGGLES
Fog develops due to several factors: a difference in temperature between the body and the water, humidity levels, etc.
Wear due to friction is one of the main causes.
If your goggles fog up, dip your lenses in the water and a protective film will reform.
After a certain amount of time, it is normal for the performance of the anti-fog coating to be diminished.
We provide an anti-fog marker that reactivates an ageing anti-fog treatment and which makes your goggles last longer.
CHOOSING THE SIZE OF YOUR SWIMMING GOGGLES
The watertightness of the swimming goggles is dependent on the proper fit of the skirts with the shape of your face. Before purchase, we advise you to do the "suction" test with your goggles without the elastic strap:
If the goggles stay on your face by themselves, with slight suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on your face.
This model is available in sizes S & L(narrow & rounder faces).
ADJUSTING YOUR SWIMMING GOGGLES
These swimming goggles fit the morphology of your face without needing to be over-tightened.
Goggles that are too tight can cause discomfort, leave marks and even create water inlet holes.
It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes.
The straps should ideally sit 2 to 3 cm above your ears. This position will optimise the grip and comfort of the goggles.
LOOKING AFTER YOUR SWIMMING GOGGLES
We advise you to:
- Rinse your goggles (only if necessary) by dipping them in the water
- Avoid water jets directly on the inner face of the lenses
- Store the goggles in their case between sessions to avoid damaging the lenses (on the inner face to protect the anti-fog treatment, on the outer face to avoid scratches)
- Avoid exposing the goggles to temperatures over 60 °C,
- Do not touch or wipe the inside of the lenses
LENS TINT
The colour of your goggles should be suited to your swimming location and its lighting.
If you swim outdoors or in a pool with harsh lighting, prioritise goggles with smoked lenses to limit the glare.
If, however, the pool is quite dark with low lighting, winter evenings for example, use clear lenses.
The SPIRIT swimming goggles are available with different lens tints (mirrored, shaded, clear).
UV PROTECTION
Complies with standard QB/T 4734-2023; all Nabaiji swimming goggles protect against harmful UVA and UVB rays when used normally, regardless of the lens tint.
Looking directly at the sun is dangerous and can lead to irreversible eye damage.
COMPOSITION
composition
Lens: 100.0% Polycarbonate; Frame: 50.0% Polycarbonate, 50.0% Thermoplastic Polyethylene; Gasket: 100.0% Thermoplastic Polyethylene; Strap: 100.0% Silicone
Tips for storage and maintenance
Storage tips
After use, store the goggles in their case.<br /> Important: Do not touch the inner surface of the lenses as this could destroy the anti-fog treatment
TESTS AND WARRANTY
Test product
The Nabaiji swimming goggles comply with the EPI regulation 2016/425. Our products are tested and approved by independent laboratories. Goggles intended for swimming at the surface
Warranty
2 Years
Agree by
CE marking: It certifies that the protective eyewear complies with the essential requirements of the European directive which concerns it and satisfies the certification procedures which apply to it.
Videos
Ecodesign approach
With ecodesign, we reduce the environmental impact of our products.
Analysing the product's environmental footprint enabled us to identify the most impactful stages of its life cycle. Thanks to this approach, our design teams were able to develop this product while significantly reducing its environmental impact.
Ecodesign actions on this product
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 50% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.